10gBase-T NIC needed for Proliant DL385 G7
Hi, Can someone recommend a 10gBase-T NIC (RJ-45) for our Proliant DL385 G7 server please?The ones that HP makes looks like they are only compatible with the Gen 8 models. thanks in advance.
View ArticleRe: HP Proliant DL360 G7 not picking up SAN connected via SCSI
Hi, SAN = Storage Area Network.Do you have a disk array connected to the SC11Xe? Which one? .. Actually, when I look on this page:...
View ArticleRe: ProLiant ML350 G5 Smart Array E200i battery failure
At most, a dead or discharged battery will disable the write caching on the controller. It should still operate as normal, with the exception of not being able to expand/extend/migrate existing arrays...
View ArticleRe: Move array from server A to server B
Ditto what others said... the array information is stored on the controller NVRAM *and* on the disks themselves.You can tell this is true because if you remove all disks from a system and try to boot,...
View ArticleRe: DL380p Gen 8 ilo problem
It might help to look for rogue DHCP servers... it wouldn't be the first time some developer or something setup a server and slapped DHCP services on there for some reason, happily passing out IP...
View ArticleRe: Proliant G6 -Change Failed SAS Disk
Glad you found the solution. Yes, you can use a larger drive to replace a failed disk. Even though HP might not list the 146GB drives anymore, many resellers probably still carry them.I've used the...
View ArticleRe: DL 380 G5 Processors Fit DL 585 G2?
Proliant DL/ML/SL xx0 servers are Intel, and DL/ML/SL xx5 servers are AMD. In other words, that last digit either 0 or 5 is what tells you it's Intel or AMD.AMD and Intel processors are NOT...
View ArticleRe: How to enable Embedded NICs on Proliant dl380 G5
Kevin Keller_2 wrote:Already tried that. No luck. The ports are still stuck at the ISCSI settings.They aren't really "stuck at the iSCIS settings". Even on a system using both NICs only for Ethernet...
View ArticleRe: HPSUM 6.2 Troubles
I just figured it's about time to update some firmware on some of my HP servers. The company used to be all IBM but when I took over as admin I started buying HP because I loved how easy SmartStart and...
View ArticleRe: 10gBase-T NIC needed for Proliant DL385 G7
10 Gigabit Ethernet adapters HP NC522SFP Dual Port 10 GbE Server Adapter 468332-B21HP NC523SFP 10Gb 2-port Server Adapter 593717-B21HP NC550SFP Dual Port 10 GbE Server Adapter 581201-B21HP NC552SFP...
View ArticleRe: Are the 300GB 6G SATA Value Endurance SSDs appropriate for mission...
I advise you to use this controller card : HP Smart Array P822/2GB FBWC 2-ports Int/4-ports External SAS Controller 615418-B21 This HDD HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value...
View ArticleRe: 10gBase-T NIC needed for Proliant DL385 G7
Those are all SFP connections and not RJ-45 correct? I need to connect a NAS with a 10gb card to the server via crossover cable and require a RJ45 connection
View ArticleDL180 No Post / BMC Blinking, all leds Green
Hi, i will describe the issue hoping to find an answer because I'm about to go crazy, I have a DL180 G6 with 1 proc. 2 DIMMS on position A2 B4 like it says on the manual, a month ago a fan failed...
View ArticleiLo on DL160se G6 stops working..
Anyone out there have an issue with iLo on the Dl160se G6 servers?Specifically iLo webpage stops working. You can pin gthe iLo IP address but you cannot get to the website to do any config or KVM work....
View ArticleRe: HPSUM cp021548.exe - Error reading XML file
I have the same problem (internal error 27) on a DL380G5 with NC373iThe older Version 4.0.0.22 (cp018468) doesn't work too. Maybe the G5-Hardware is too old for that firmware (the "current version" on...
View ArticleRe: ML350p Gen8 - Hard Drives, SBS and Controller??
Look for supported SSDs:http://h18000.www1.hp.com/products/quickspecs/productbulletin.html#spectype=worldwide&type=html&docid=14226Hot Plug SFF SATA SSD 9.6TB 24 x 400GBHot Plug SFF SAS SSD...
View ArticleLosing frame/ping on ProLiant DL380p Gen8 running linux with NC552SFP
We have two ProLiant DL380p Gen8 servers with (NC552SFP) emulex 10Gbit network cards. The network cards are losing the connection, we cannot even ping the server. Using several different version of...
View ArticleRe: HP Proliant DL380 G5 NIC's not found after firmware update
Another way to get the original settings any namings of the NICs is to dump the NVRAM of a working NIC and program it into a broken/reanimated one. I restored 3 broken NICs in our enviroment last week....
View ArticleRe: How to enable Embedded NICs on Proliant dl380 G5
I had not looked at this other thread until this morning. One of the messages says the NICs show as disabled. Did you update teh NIC firmware right before this problem appeared?...
View Article