Re: SAS discs not working
hello my friendwhat do you mean "cable ports."is this data safe ?Â
View ArticleRe: HpCISSs3 Error 5008, 129, 153 + Cissesrv 24607 = freezing VMs on node
I am not sure what should I be looking for. Here are zip files.HBA: https://instruments.cz/wp-content/uploads/2020/03/ADUReport-HBA-H241.zipP440ar:...
View ArticleRe: End of Support for ProLiant Series
Yes, the retired products would be getting the security-relevant updates on HPEÂ Security Bulletins.
View ArticleRe: replace hdd with ssd
Hi Yes, you cannot mix HDD (SAS/SATA) and SSD in a single array.You can create new logical drive with SSD and clone the disk, or take restorable data backup from existing logical drive and restore the...
View ArticleRe: DL580 G9 SSD firmware HPG3 to HPG5 not activating (cp039742)
Hello,Good Day!!!Please follow the below customer bulletin to fix this issue as well as update SA controller firmware with the latest.Bulletin: (Revision) HPE Solid State Drives (SSD) - SSD FIRMWARE...
View ArticleRe: HP DL20 GEN 9 - ERROR INSTALL DEBINA 8, 9, E 10
Hello,I would request you to update the server with the latest bios Version:2.82_04-04-2019 (1 May 2019)----->2.84_11-07-2019(15 Nov 2019) because currently, the server is running old bios...
View ArticleHP GEN8 DL360P Memory Not Working - I dont understand
Hi,I am buyed to 6 per 4RX4 32GB Memory. I dont working HP DL360P G8 server.Scenario;6X32GB Memory bios showing total capacity no problem but boot screen 184GBÂ (Bios screen 192GB no problem)4X32GB...
View ArticleClik here to view.
Re: HP GEN8 DL360P Memory Not Working - I dont understand
hellothe memory should be equal between the cpusi attached a 6 x 32 GB installation diagram for you to test - it should work normallyalso set up the memory in the bios to Advanced ECC memory...
View ArticleHPE G10 MicroServer
Hi Guys,so it seems the BIOS cant see the SSD i have connected to a SATA connection anymore?this has been working fine for 2 years, in the SASA config you can see the drive, it just wont show it as...
View ArticleRe: DL360 Gen10 Server 2019 - OS will not install right
There is likely some sort of hardware issue given the fact that the other servers that you have operate just fine. (Assuming you have them ordered with the same hardware configuration.)The easiest...
View ArticleRe: DL360 Gen10 Server 2019 - OS will not install right
A small correction ... The boot block selection menu is f11 key.
View ArticleRe: SAS discs not working
Sorry, I forgot you are using the P430. This controller has different cables.Do you still have the cables for the built-in P420i?For testing, you may consider to connect the disk backplane to the...
View ArticleRe: SPP for HP DL380 G8
Following up on this thread ...The SPP doesn't seem to be freely available. A valid warranty or service agreement seems to be required. If we buy our servers second hand then how are we suppose to...
View ArticleRe: Best, most compatible Win OS for Proliant G8 server?
Replying to my own thread here ...I understand Server 2016 is the tested and certified choice of Windows operating system but I still had an itch to try 2019. Microsoft offers evaluation copies of...
View ArticleRe: ML350p Processor Upgrade - Steps and parts?
Wow, the Part Surfer site is super cool! Thanks for posting it!I entered 722301-B21 and I can see the fan, the latch, and the processor. The site also gives me parts 662858-B21 and 722306-B21 with...
View ArticleRe: Maximum drive storage configuration ML350p G8
Sanjeev,I think you may have been in a rush to reply and didn't check your links. You sent me documentation for three different servers and they all relate to removing the SFF cage. What would it take...
View ArticleRe: Intelligent provisioning not working after ugrade to 3.1.1.
Finally I solve myself: I have to revert to factory default and reset the iLO via RBSU; after that I am able to reinstall the Intelligent Provisioning via the recovery media and all other software (IP,...
View ArticleRAM capacity vs. speed trade-off
I discovered the HPE online memory configuration tool.https://memoryconfigurator.hpe.com/ddr4memoryconfig/home/legalPretty slick!I noticed that increasing the overall RAM capacity of the server results...
View ArticleRe: SAS discs not working
So the only choice you habe is to swap the cables at the backplane and check, if the first slots are detected.Don't try to boot up the OS in this configuration. It would probably not work.
View Article