Replace RAID controller P440ar for DL380 Gen9
Hello,I have a server DL380 G9, the raid controller P440ar reported a critical error so I have bought a new P400ar card. What do I need to prepare when I replace the new card without losing raid...
View ArticleController not connected and i have the error - 226-Power fault detected ...
Hi Experts,Can anyone please help me.I have a Proliant DL 360p Gen8, first i got an error during the boot :POST Error: 226 - Power Fault Detected - Embedded Storage Controller Action: Re-seat storage...
View ArticleRe: Replace RAID controller P440ar for DL380 Gen9
Replace the controller. Update firmware if needed.All config information is stored on the disks.
View ArticleRe: HP server one HDD showing Amper light continuasly
Hello,I hope you are doing well.I would suggest you log a support case with the HPE for further investigation to avoid any data loss.If you feel this was helpful please click the KUDOS! thumb below!...
View ArticleRe: DL380 G7 + Smart Array P822 capacitor recharging issue
Hello,SA P822 doesn't support with the DL380 G7.Please follow the below-supported documents for more clarification.DL380 G7 QuickSpecshttps://h20195.www2.hpe.com/v2/GetPDF.aspx/c04199811.pdfHP ProLiant...
View ArticleRe: Replace RAID controller P440ar for DL380 Gen9
Hello,You can replace the faulty P440ar card without any issue.Make sure to update SA P440ar controller firmware with the latest.If you feel this was helpful please click the KUDOS! thumb below!...
View ArticleRe: DL380 G7 + Smart Array P822 capacitor recharging issue
You are right. Smart Array P822 controller is supported on a DL380 G7, but the P812 which is supported, doesn't do SATA 3.0 (6 Gbps), which is what the 4 SSDs in the system use. This is a homelab...
View ArticleHP ProLiant DL320 G6 Servers Auto Power Off Problem?
Hello Dear All,My name is Shahrukh and I am looking after a SCADA System. We have 10 number of HP ProLiant DL320 G6 Servers running WIndows Server 2008 for the last 8 years. There is one specific...
View ArticleAdding 10Gbps to ProLiant ML350p Gen8
Hello,I have a ProLiant ML350p Gen8. I am running it virtualized and looking at getting a NAS for virtual machine storage instead of local disk storage. I don't want to run standard 1Gbps as that would...
View ArticleClik here to view.
Re: DL360 Gen10 PCIE Slot 3 not PCIE Compatible?
Hi,What all PCIe adapter you have installed in the Slot 1, Slot 2 and slot 3?Have you checked by updating BIOS and ILO to latest ?Also reconfirm issue with PCIe slot 2/slot 3 ?Can you please remove any...
View ArticleRe: Inventory Error when upgrading firmware
Hi,While running "launch_hpsum.bat ", right click and choose run as administrator or run as root user in linux.else you may get inventory errors. Regards,Sudhir
View ArticleRe: DL360 G7 all 4 HDDs in amber led error at boot
Hello Sudhir,Again thank you for the response. Your link booted succesfully and managed to get to get an ADU report from the utility.I hope this pastebin link doesnt delete this...
View ArticleRe: DL360 G7 all 4 HDDs in amber led error at boot
Hi,Now, We know following:1. Embedded controller P410i detected but no physical drives seen in it.2. There is a 512Mb cache module but not configured, since there is no logical drive detected.But you...
View ArticleBooting ESXi 6.5 from USB on an HP Proliant DL360p Gen8 Server
I hope you can help :')Hello EveryoneI plugged a USB 16Go to internal usb port of my DL360p Gen8 server, booted the ESXi 6.5 (HPE custom image) cd and told it to install to the usb drive. Install...
View ArticleHP ProLiant DL320 G6 Server, not entering POST?
Hello all.This is Shahrukh. I have a server HP ProLiant DL320 G6, OS = Windows Server 2008 R2 Standard, Raid-1, iLo-2. The said server went under 2-3 power failure cycles and now the server is stuck...
View ArticleCan HPE ML30 Gen9 support Intel Quick Sync CPU
I have two HPE ML30 Gen9 servers. One has the Intel Xeon E3-1230 v5 CPU (3.4 GHz). The second has the Intel Xeon CPU E3-1240 v6 (3.70GHz). I'm currently using ESXi 6.7 on them, and run Plex on one of...
View ArticleRe: DL360 G7 all 4 HDDs in amber led error at boot
once again, thank you for the extensive reply.After entering an old trial key which gave me 60days trial i rebooted the server, still no go.I Rebooted the HP Smart Start iso once again and performed a...
View ArticleClik here to view.
Re: Adding 10Gbps to ProLiant ML350p Gen8
Hi, go to HPE QuickSpecs portal and, under the Online QuickSpecs section, select Search All QuickSpecs.Once there search for the string "HP ProLiant ML350p Generation 8 (Gen8)".The (worldwide valid)...
View ArticleDL380 Gen9 4LFF to 12LFF
Hello all, the Quickspecs from DL380 Gen9 4LFF say the Server is not Field Upgradable to 12LFF. Whats the reason for this? I only need a 12LFF Backplane, some cables and Controller for 12LFF? best...
View ArticleHP Proliant DL360 G7 CPU Upgrade Caused Failed Boot
I wanted to upgrade my DL360 G7 to Xeon X5687's after installing them it does not make it to post screen and instead beeps at me quickly, not a steady beep but a very quick on, off repeated. I tried...
View Article