Re: HP Proliant DL360 G7 CPU Upgrade Caused Failed Boot
Found my own solution, this server ships with 2 different mother boards, a different board is needed to support these CPU higher watage....
View ArticleRe: Upgrading driver for SmartArray safe?
Thanks for reply Sudhir, I was so afraid that I did not upgrade the smartarray, everything seems to be working fine anyway. My server is an HPE ML350p Gen8 server. There are 12 missing device drivers....
View ArticleRe: DL360 Gen10 PCIE Slot 3 not PCIE Compatible?
Hi sudhirsingh,I try to install oem nvme adapter to pcie slot 3, as I have second processor installed.it works when I installed on pcie slot1 or slot2 (Riser 1)so I made conclusion that DL360 Gen10...
View ArticleRe: Upgrading driver for SmartArray safe?
Hi James,Please download the Gen8.1 SPP from below link then extract and run "launch_hpsum.bat" in windows to update all the driver and firmware.Interactive mode will let you choose which update you...
View ArticleRe: DL360 Gen10 PCIE Slot 3 not PCIE Compatible?
Not sure about third party NVME adapters,However there are multiple NVME options available for Dl360 gen10 which you can consider.Server...
View ArticleRe: DL360 G7 all 4 HDDs in amber led error at boot
Was it configured under Raid6 earlier (before systemboard replacement)?Please POST ADU log after activating SAAP license.Are you using the same license key used earlier ?If there is no previous...
View Articlehpsmhd.service file missing from install
I've gotten hpsmhd installed successfully on my DL380 G8 SuSE 15 box, and I can run it from CLI by using the SMHSTART command, but there is no unit file for autostarting the service under systemd. Does...
View ArticleRe: Gen10 Array Controllers in mixed mode
Hello,SA P816i-a controller supports mixed-mode and you can use OS drive and configure the rest of the hard in VSAN.But I would like to suggest configure OS hard drive with another SA controller and...
View ArticleRe: Gen10 Array Controllers in mixed mode
This is about Ceph, not vSAN. I brought up vSAN only because there is a VMware KB article that states that mixed mode is not suported with vSAN.You write that you do not suggest to use mixed mode to...
View ArticleRe: DL380 G7 + Smart Array P822 capacitor recharging issue
Hello,Again, I would suggest you the supported hardware components with the respected products.Follow the below SA P822 controller documents for more information.HP Smart Array P822 Controller -...
View ArticleSAS drive Firmware Update
Hi there,We have a proliant Gen 8 running 2008 R2 and recently one of the drives failed, so I got a new one but the Smart Storage Administrator software is saying the firmware should be updated from...
View ArticleRe: HP ProLiant DL320 G6 Server, not entering POST?
Hi Shahrukh,As per problem description and symptoms report, suspected issue with Power supply backplane, however you can follow below action to isolate the issue.Action1:Power DOWN the server, remove...
View ArticleRe: HP ProLiant DL320 G6 Servers Auto Power Off Problem?
Hi Shahrukh,As per problem description and symptoms report, suspected issue with Power supply backplane, however you can follow below action to isolate the issue.Action1:Power DOWN the server, remove...
View ArticleRe: Controller not connected and i have the error - 226-Power fault detected...
HiIn rare instances some of the HP ProLiant DL360p Gen8 Servers may display the following error on startup:"226 Power fault detected - embedded storage controller, Action: re-seat storage controller if...
View ArticleRe: DL380 Gen9 4LFF to 12LFF
Hello,I hope all is well.Please follow the below HPE ProLiant DL380 Gen9 Server -Quick Specs HPE ProLiant DL380 Gen9 Server - QuickSpecs ( Follow Page no-7)...
View ArticleFW Update HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter über OneView mit SPP
Hi Forum,wir haben hier einige DL380 Gen9 mit der oben genannten Netzwerkkarte. Die Server werden per Profil in OneView konfiguriert und mit Firmware bespielt. Nun haben wir festgestellt, dass die...
View ArticleClik here to view.
Re: Booting ESXi 6.5 from USB on an HP Proliant DL360p Gen8 Server
Hello,I hope all is well.Follow the below stepsHP ProLiant Gen8 Server Series:USB Boot Support USB Boot Support controls whether the system boots from USB devices connected to the server. When...
View ArticleClik here to view.
Re: DL360e Gen8 post message 261 - Server Platform Services Firmware Flash
Hi, SanjeevGoyal.I installed the latest version BIOS 05.24.2019.Just restarted the server. No effect.Through Intelligent Provisioning from the Internet, I tried to install the latest firmware.There...
View ArticleRe: Can HPE ML30 Gen9 support Intel Quick Sync CPU
Hi Please refer HPE ProLiant ML30 Gen9 Server - Option Parts to know about supported processor on HPE ProLiant ML30 Gen9 Server.https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04917058If...
View Article