Re: ProLiant DL380 G7 - Lost NICs after Driver-Update
There was a recent issue with a firmware update for the 1GB Broadcom multifunction nics that was causing problems. The firmware update was failing or something, resulting in the NICs not appearing in...
View ArticleRe: NIC trouble with Hyper-V on DL360P Gen8
Make sure you are NOT using the NIC driver 7.8.6.0. There are problems with that version of the driver, but I think that version is specific to the 1GB Broadcom Multifunction cards, not the 331FLR.All...
View ArticleRe: HP Proliant ML350 Gen 8: How to set up the disks.
Hi, belt and suspenders setup:RAID10 with 2+2 disks and a spare. Gives ~1TB of usable space that is both fast and reliable.It is possible to expand a RAID10 array with more disks in the future if needed.
View ArticleRe: HP DL380 G6 Server - Not Booting
removed the cache module, and re-booted still getting the same symptoms. is there anything else I could try? Tombstone
View ArticleRe: HP DL380 G6 Server - Not Booting
disconnect the disks (pos. 18+19).If you still get the failure, you probably need a new system board.
View ArticleRe: HP DL380 G6 Server - Not Booting
I have a spare, I think I might just give in and use that if this doesn't work haha. I'll let you know how I get on. Many thanks for your help it's been very much appreciated. Tombstone
View ArticleRe: HP Proliant DL380p Gen 8 : PCI card for additional USB ports.
Hi this a link for some PCI USB cards [SuperSpeed]: http://www.startech.com/Cards-Adapters/USB-3.0/Cards/?filter_BUSTYPE=PCI+Express
View ArticleRe: Remote Insight interface error. .1.3.6.1.4.1.232.0.9006 interface error
I am getting "Remote Insight Agent The Remote Insight Board Integrated Lights-Out has detected a controller interface error. SNMP TRAP 9006 in CPQSM2.MIB" errors in the system event logs and iLO2 is...
View ArticleWhere do I find the latest Offline Diagnostics ISO?
I have a DL360 G7 running Windows 2008 R2 that starting rebooting randomly on it's own 4-5 times a day about two weeks ago. No hardware or software errors are recorded, no amber error indicators on...
View ArticleRe: Where do I find the latest Offline Diagnostics ISO?
you can use this link to download smart start 8.70 :...
View ArticleRe: Problems with Proliant DL560 Gen 8
I have a new DL380p Gen8 server with the same problem. The server shutdown almost every hour with a IML log "System Power Fault Detected. System Has Enabled Power Protection and Disabled Power...
View ArticleHang the server when coping large files
Hi all, I have just reinstalled Windows server 2003 on HP Proliant DL380 G5, but the server hangs and reboots if I copy large files to the server (via network, external stogare or between the folders)....
View ArticleDL180 G6 + LSI 9271-8i
Dear Team. I have a brand new LSI 9271-8i raid controller and I want use this with my Prolian DL180 G6, the new controller is a PCIe Gen 3 and is compatible with PCIe Gen 2. The current server...
View ArticleRe: DL180 G6 + LSI 9271-8i
I don't think so. Specs are more or less the same and you run both at PCIe Gen2.
View ArticleRe: Where do I find the latest Offline Diagnostics ISO?
Consider to boot the SPP 2014.02 ISO, the diagnoastic is included.http://www.hp.com/go/spp
View ArticleInstall ACU on Hyper-V Server 2012
We have a DL380p Gen8 running Hyper-V Server 2012 R2 and initially only setup a single logical drive from the ACU in the BIOS. I'd like to create some more drives now (from a remote location) but can't...
View ArticleRe: Install ACU on Hyper-V Server 2012
Torsten, Thanks for the prompt reply but I'm not sure that this will install on Hyper-V Server as there's no GUI? I do seem to recall seeing a file on the C:\ drive of the server that contained the...
View ArticleRe: Install ACU on Hyper-V Server 2012
Just had a look at the server and the CLI version of SAA has been installed on the C:\ drive.Thanks for you helpCheers for nowRussell
View Article