ILO upgrade
Hi experts! We have an ML350G6 with ILO2. Is it posible to upgrade ILO2 to ILO4? Thanks in advance.
View ArticleRe: ILO upgrade
No. The ILO chip is integrated into the system board. Consider to get a Gen8 server ;-)
View ArticleHP 649281-B21 adapter (InfiniBand/Ethernet) ?
Can the HP 649281-B21 adapter (InfiniBand/Ethernet) be used as a regular Ethernet card for iSCSI connectivity?I'd like to use the above HP adapter as a regular Ethernet card to connect to the array...
View ArticleRe: DISKPART ERROR "the disk management services could not.."
I know this is an old thread but it did help me resolve a diskpart issue but with one additional step that I found on my own. I thought I would share it in case someone else stumbles across this at a...
View ArticleRe: HP 649281-B21 adapter (InfiniBand/Ethernet) ?
Looks like you can:http://h18004.www1.hp.com/products/quickspecs/productbulletin.html#spectype=north_america&type=html&docid=13078Single or dual port 40 or 10 Gbps Ethernet
View ArticleRe: HP 649281-B21 adapter (InfiniBand/Ethernet) ?
Thank you Torsten,Yes, it appears that you should be able to based on the spec.But I wanted to get confirmation from someone that has actually used this adapter to connecte to a 10Gb Ethernet switch...
View ArticleRe: HP 649281-B21 adapter (InfiniBand/Ethernet) ?
Specs shows it working as Infiniband, Ethernet, or a mix
View ArticleRe: HP 649281-B21 adapter (InfiniBand/Ethernet) ?
>> But I wanted to get confirmation from someone that has actually used this adapter to connecte to a 10Gb Ethernet switch and install and configure the iSCSI SW initiator on the Host to connect...
View ArticleRe: Hang the server when coping large files
isthereabluescreen?Haveyoucheck theeventsofwindows?
View ArticleRe: Intelligent Provisioning wants Autounattend.xml, retaining settings
we ran into this exact issue, knew this issue was related to special characters in company name but its more widespread because the install also fails if you have a special character in the initial...
View ArticleRe: HP 649281-B21 adapter (InfiniBand/Ethernet) ?
Hi, not sure how to check which HP adapter is installed in a server. But looks like the MT27500 is used in 649281-B21 adapter. I've a few Mellanox connectx 3 and 2 based adapters in HP servers with...
View ArticleRe: DL380 G8 fans.
I have two servers 380e 668668 25 SFF with latest firmware and software.These new servers is taken from warehouse after a half-year conserveation.I see a 13-20°C from sensors during loading process....
View ArticleML330 G6 Shoulder Screws
Good afternoon all, I have an ML330 G6 which I am adding a second drive bay to. Because the kit is apparently no longer available I have had to buy the individual parts. The only ones I am missing now...
View ArticleRe: ML330 G6 Drive Cage
I recognise this was a post from last year, but I too scoured the internet trying to track one down. Parts availability is very poor for such a recent unit. I even had to source a redundant PSU kit...
View ArticleML350e G8 v2 vs ML350p G8
Is there anything specific about the ML350e G8 v2 that is not available in the ML350p G8 that would make me want to go with the ML350e G8 v2? I could go with either chassis but there are some...
View ArticleRe: ML330 G6 Shoulder Screws
NOTE: To reach maximum 8 LFF Drive support, it is required to purchase 2 Hot Plug HDD Drive Cage kit and Smart Array controller 8 ports or 2x 4 ports. HP 5U Hot Plug HDD Drive Cage Kit : 487737-B21 For...
View ArticleILO2 Issue
I have 1 DL380 G5 and 2 DL580 G5 with ILO2.I cannot access ILO Web or Online Configuration to all three Servers.I have to COLD reboot (Unlpug Power Cords) to bring ILO Back, and all seems working...
View ArticleSystem Managment Homepage 7.3 and Windows Server 2003
Has anyone else noticed that the last version of the System Management Homepage to work on Windows Server 2003 operating systems is 7.2.2.9? The 7.3 releases say they apply to Windows Server 2003 and...
View ArticleRe: ML330 G6 Shoulder Screws
That's the kit I tried and tried to get with no success. I've already used 2 screws from the existing cage but would obviously prefer both to be fitted properly. Thanks
View Article