Re: ILO2 Issue
Are you running a security scanner on your network? Look at the iLO section.http://intranet.hp.com/tsg/GSE/SSRT/Pages/CVE-2014-0160.aspx
View ArticleSetting PXE NIC Boot order
I have several servers i need to set the PXE boot order on the server. I know you can use the Setbootorder utility to set the RBSU's Boot order to pxe usb hd etc, however i need to set the PXE NIC boot...
View ArticleHeartBleed makes my fingers bleed
Beware of any HeartBleed scan on ILO1 and ILO2 ports. Since the scan took place last week I've had to address 330 ILO RedX issues and these are just blade servers. I haven't even begun to address and...
View ArticleRe: Hang the server when coping large files
Hi scharchouf Thank you very much for your answer. There is not a blue screen before restarting the server. The event and server logs as the attachments. Please refer to the attachment and help me for...
View ArticleHP ML350 G5 DVD DRIVE
Is the dvd drive a read only or a read write drive and can i put a read/write drive inplace of it if it is a read only also will the machine support bluray drivesMany thanks Richard C
View ArticleRe: ILO2 Issue
NO, Server is at Data Center and they are not running anything.Link to site did not work for me.
View ArticleRe: Hang the server when coping large files
ASR Detected by System ROM = Automatic Server Recovery Events which may contribute to the operating system locking up include:• A peripheral device − such as a Peripheral Component Interconnect...
View ArticleRe: HP ML350 G5 DVD DRIVE
Optional Optical Drives : Floppy Drive ML350/370 G5 Kit 409582-B21 CD-RW/DVD-ROM Combo Drive Option Kit 331346-B21 HP DVD±R/RW 16X Half Height 383974-B21 16X DVD-ROM Drive Option Kit (Carbon)...
View ArticleRe: ILO2 Issue
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c04249766
View ArticleRe: HeartBleed makes my fingers bleed
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c04249766
View ArticleRe: Setting PXE NIC Boot order
CONREP: The Configuration Replication Utility (CONREP) can be used to capture or replicate server configuration settings, but basically it configures system BIOS settings. HPRCU: HP ROM Configuration...
View ArticleRe: HP DL380 G7 - Power button state Yellow, won't turn ON the server! It...
We appear to be having a similar problem with our DL380 G7 Servers. What we have been able to determine is that it appears to be temperature-related (at approximately 30 degrees Celsius). This is...
View ArticleRe: HP DL380 G7 - Power button state Yellow, won't turn ON the server! It...
Can you give us the led for :Systems Insight Display LEDs
View ArticleProliant DL360 G5 Power Supply - Home Use
Hi, I purchased a used DL 360 G5 server and I wondered whether I can plug it to my home power supply which is 110Volts. It says the INPUT 100-127V~/9.0Amps 200-240V~/4.5Amps50-60Hz I only...
View ArticleHelp with Smart Array P410 specs and update?
Hi, I've got a Proliant Dl160 G6 with a Smart Array P410 controller.I'm wondering, and haven't found clear information online: 1) How do I find the current firmware version of this controller, and how...
View ArticleRe: Proliant DL360 G5 Power Supply - Home Use
Specification Rated Input Voltage 100 to 240 VACRated Input Current 7.1 Amps (at 120VAC) to 3.5 Amps (240 at VAC)Rated Input Frequency 50 to 60 HzRated Input Power 852 WPower Supply Output Power...
View ArticleRe: Help with Smart Array P410 specs and update?
I wont divert your thread but I have an identical setup and am searching right now on what I need in order to get the server to see my recently installed P410 controller.
View ArticleP410 RAID Controller Installation - Configuration on Proliant DL 160 G6
I have just recently installed a P410 Raid Controller in a HP Proliant DL 160 G6 so that I can run it with ESXi. As I found out the hard way a physical RAID controller is required in order to run...
View ArticleRe: HP ML350 G5 DVD DRIVE
thanks for that put a rw drive in worked just fine backup was very successful
View Article