Quantcast
Channel: All ProLiant Servers (ML,DL,SL) posts
Viewing all 30225 articles
Browse latest View live
↧

Re: DL360 Gen10 PCIE Slot 3 not PCIE Compatible?

April 19, 2020, 7:17 am
$
0
0

Hi sudhirsingh,

I try to install oem nvme adapter to pcie slot 3, as I have second processor installed.

it works when I installed on pcie slot1 or slot2 (Riser 1)

so I made conclusion that DL360 Gen10 PCIE Slot 3 will only works with hpe parts.

 

 

 

↧
Search

Re: Upgrading driver for SmartArray safe?

April 19, 2020, 7:53 am
$
0
0

Hi James,

Please download the Gen8.1 SPP from below link then extract and run "launch_hpsum.bat" in windows to update all the driver and firmware.

Interactive mode will let you choose which update you want to install.

Automatic mode will update all the driver and firmware to the latest as per the Gen8.1 SPP release.

https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx?version=Gen8.1

 

Note: Its recommended to keep data backup before updating driver and firmware however its not a destructiveprocess.

 

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Sudhir

 

↧
↧

Re: DL360 Gen10 PCIE Slot 3 not PCIE Compatible?

April 19, 2020, 9:38 am
↧

Re: DL360 G7 all 4 HDDs in amber led error at boot

April 19, 2020, 9:47 am
$
0
0

Was it configured under Raid6 earlier (before systemboard replacement)?

Please POST ADU log after activating SAAP license.

Are you using the same license key used earlier ?

If there is no previous configuration/data, did you tried to erase the drive from ACU ?

Atleast the one good drive should be discovered under P410i.

 

Thanks,

 

↧

hpsmhd.service file missing from install

April 19, 2020, 6:11 pm
$
0
0

I've gotten hpsmhd installed successfully on my DL380 G8 SuSE 15 box, and I can run it from CLI by using the SMHSTART command, but there is no unit file for autostarting the service under systemd. Does anyone have a pointer?

Thanks!

↧
↧

Can HPE ML30 Gen9 support Intel Quick Sync CPU

April 18, 2020, 11:27 am
$
0
0

I have two HPE ML30 Gen9 servers. One has the Intel Xeon E3-1230 v5 CPU (3.4 GHz). The second has the Intel Xeon CPU E3-1240 v6 (3.70GHz). I'm currently using ESXi 6.7 on them, and run Plex on one of the servers.

I'd like to upgrade the CPU of one of them to an Intel Xeon CPU that supports Quick Sync. Can anyone recommend what Intel Xeon CPUs (that support Quick Sync) will work with the HPE ML30 Gen9? Will the HPE ML30's even support Quick Sync if the CPU supported it?

↧

DL380 Gen9 4LFF to 12LFF

April 18, 2020, 2:00 pm
$
0
0
Hello all, the Quickspecs from DL380 Gen9 4LFF say the Server is not Field Upgradable to 12LFF. Whats the reason for this? I only need a 12LFF Backplane, some cables and Controller for 12LFF? best regards ré
↧

HP Microserver Gen8 Nand problem

April 19, 2020, 4:01 am
↧
Search

Re: Gen10 Array Controllers in mixed mode

April 20, 2020, 2:11 am
$
0
0

Hello,

SA P816i-a controller supports mixed-mode and you can use OS drive and configure the rest of the hard in VSAN.

But I would like to suggest configure OS  hard drive with another SA controller and configure VSAN in other SA controllers to avoiding any issue.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

 

↧
↧

Re: Gen10 Array Controllers in mixed mode

April 20, 2020, 2:19 am
$
0
0

This is about Ceph, not vSAN. I brought up vSAN only because there is a VMware KB article that states that mixed mode is not suported with vSAN.

You write that you do not suggest to use mixed mode to avoid issues. What issues? That's what this thread is all about. To get a feeling what issus might be introduced by mixed mode. Some technical information. But I could not find any information _why_ mixed mode is a problem?

↧

Re: DL380 G7 + Smart Array P822 capacitor recharging issue

April 20, 2020, 2:44 am
↧

SAS drive Firmware Update

April 20, 2020, 2:58 am
$
0
0

Hi there,

We have a proliant Gen 8 running 2008 R2 and recently one of the drives failed, so I got a new one but the Smart Storage Administrator software is saying the firmware should be updated from HPD2 to a minimum HPD4 .. problem is the latest one I can find for the drive is HPD2.

Drive: HPE 300GB SAS 6G Enterprise 10K SFF

Model: HP EG000300JWFVB (It says this model is a 12 GBPS but it's definitly 6)

Any help would be appreciated, thanks!

 

 

 

↧

Re: HP ProLiant DL320 G6 Server, not entering POST?

April 20, 2020, 3:15 am
$
0
0

Hi Shahrukh,

As per problem description and symptoms report, suspected issue with Power supply backplane, however you can follow below action to isolate the issue.

Action1:

Power DOWN the server, remove power cord and clear the NVRAM using system maintenance switch number 6. Once done, power ON the server and do the below setting in BIOS:

Select the Advanced menu.

Scroll down to IPMI and press the ENTER key.

Scroll down to the System Event Log and press the ENTER key.

At the Clear System Event Log selection, press the ENTER key to toggle between Enable and Disable. Select Enable.

Press the F10 key to save the changes and exit the BIOS Setup. Recycle the server once BIOS setting is done.

Action2:

Please confirm if server configured with a 500W High Efficiency Multi-Output Power Supply (Part Number 506077-001) and power supply white sticker reads Rev A or Rev B. If the power supply labelled with Rev A or Rev B then check by replace power supply using Spares Kit 506247-001.

Action3:

If none of these actions remedy the situation, then suspected issue with Power supply backplane.

↧
↧

Re: HP ProLiant DL320 G6 Servers Auto Power Off Problem?

April 20, 2020, 3:15 am
$
0
0

Hi Shahrukh,

As per problem description and symptoms report, suspected issue with Power supply backplane, however you can follow below action to isolate the issue.

Action1:

Power DOWN the server, remove power cord and clear the NVRAM using system maintenance switch number 6. Once done, power ON the server and do the below setting in BIOS:

Select the Advanced menu.

Scroll down to IPMI and press the ENTER key.

Scroll down to the System Event Log and press the ENTER key.

At the Clear System Event Log selection, press the ENTER key to toggle between Enable and Disable. Select Enable.

Press the F10 key to save the changes and exit the BIOS Setup. Recycle the server once BIOS setting is done.

Action2:

Please confirm if server configured with a 500W High Efficiency Multi-Output Power Supply (Part Number 506077-001) and power supply white sticker reads Rev A or Rev B. If the power supply labelled with Rev A or Rev B then check by replace power supply using Spares Kit 506247-001.

Action3:

If none of these actions remedy the situation, then suspected issue with Power supply backplane.

↧

Re: Controller not connected and i have the error - 226-Power fault detected – Embedded storage cont

April 20, 2020, 3:28 am
$
0
0

Hi

In rare instances some of the HP ProLiant DL360p Gen8 Servers may display the following error on startup:

"226 Power fault detected - embedded storage controller, Action: re-seat storage controller if removable, otherwise contact support"

Perform the following steps to resolve the issue:

1. If condition permits and FBWC is installed in the embedded controller which is Smart Array P420i Controller, re-seat the FBWC.

2. Boot the server and check for the startup messages.

3. If the FBWC is not installed or the error message continue to show upon system startup, replace the System Board.

This issue should resolved by replacing the system board.

↧
Search

Re: DL380 Gen9 4LFF to 12LFF

April 20, 2020, 4:24 am
$
0
0

Hello,

I hope all is well.

Please follow the  below HPE ProLiant DL380 Gen9 Server -Quick Specs  

HPE ProLiant DL380 Gen9 Server - QuickSpecs ( Follow Page no-7)

 https://h20195.www2.hpe.com/v2/getpdf.aspx/c04346247.pdf

HPE ProLiant DL380 Gen9 Server - Spare Parts

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04438854

HPE ProLiant DL380 Gen9 Server - Identifying Components

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04442463

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04438844

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

↧

FW Update HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter über OneView mit SPP

April 20, 2020, 4:43 am
$
0
0

Hi Forum,

wir haben hier einige DL380 Gen9 mit der oben genannten Netzwerkkarte. Die Server werden per Profil in OneView konfiguriert und mit Firmware bespielt. Nun haben wir festgestellt, dass die Netzwerkkarte immer die alte Firmware behält. Nach einiger Zeit der Fehlersuche habe ich das SPP mal geprüft und festgestellt, dass keines der von HPE bereitgestellen SPP eine Firmware für diese Netzwerkkarte enthält.

Hat jemand eine Idee wieso oder mache ich irgendeinen Fehler?

Gruß André

↧
↧

Re: Booting ESXi 6.5 from USB on an HP Proliant DL360p Gen8 Server

April 20, 2020, 4:56 am
$
0
0

Hello,

I hope all is well.

Follow the below steps

HP ProLiant Gen8 Server Series:

USB Boot Support USB Boot Support controls whether the system boots from USB devices connected to the server. When disabled, this option also disables the of iLO virtual media. Options include:

  • Enabled (default)
    • Disabled

HP ProLiant Gen8 Server.PNGbooting

 

Booting from USB device:

  • Try with front and rear USB ports on the server.
  • Booting into an External USB hard drive may not be supported.
  • Avoid using USB hub while trying to boot.
  • Make sure the USB key has bootable files.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

↧

Re: DL360e Gen8 post message 261 - Server Platform Services Firmware Flash

April 20, 2020, 5:13 am
$
0
0

Hi, SanjeevGoyal.

I installed the latest version BIOS 05.24.2019.
Just restarted the server. No effect.
Through Intelligent Provisioning from the Internet, I tried to install the latest firmware.There were no updates.No effect.
I tried to update again SPS/ME. No effect.
1.png

Server Platform Services Firmware is displayed 0.0.0.0.0
2.png
I don’t even know what to do 

↧

Re: Can HPE ML30 Gen9 support Intel Quick Sync CPU

April 20, 2020, 5:19 am
$
0
0

Hi 

Please refer HPE ProLiant ML30 Gen9 Server - Option Parts to know about supported processor on HPE ProLiant ML30 Gen9 Server.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04917058

If you are looking for processor supports Intel Quick Sync Video feature, then below are the only processor supports this Intel Quick Sync Video feature.

Intel Core i3-6000 series processors

HPE ML30 Gen9 Intel Core i3-7100 (3.9 GHz/2-core/3MB/51 W) FIO processor kit     871847-L21

Intel Core i3-6000 series processors

HPE ML30 Gen9 Intel Core i3-7300 (4.0 GHz/2-core/4MB/51 W) FIO processor kit     871848-L21

Intel Pentium G4000 series processors

HPE ML30 Gen9 Intel Pentium G4500 (3.5 GHz/2-core/3MB/54 W) FIO processor kit  871845-L21

HPE ML30 Gen9 Intel Pentium G4600 (3.6 GHz/2-core/3MB/51 W) FIO processor kit  871846-L21

 

For more information you can check processor specification on intel web site with processor model.

https://ark.intel.com/content/www/us/en/ark/search.html?_charset_=UTF-8&q=

↧
Viewing all 30225 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>