please delete
↧
please delete
↧
Re: replace hdd with ssd
why not ? it is not for a long period .. i want to replace them all
↧
↧
Re: replace hdd with ssd
>> Yes, you cannot mix HDD (SAS/SATA) and SSD in a single array.
It is simply not possible.
↧
Re: "Firmware update failed with reason: Update Failed Error: 41"
Yes, it worked perfectly! It looks like my problem was using os-independent files (eg ilo5_145.fwpkg) instead of bin files extracted from Windows executables (eg ilo5_145.bin). Which brings a question: what are the fwpkg files for? Thanks!
↧
Re: "Firmware update failed with reason: Update Failed Error: 41"
fwpkg, is also firmware update file. Usually this works for firmware update. This file availalble for Gen 10 ILO and bios firmwares
↧
↧
Re: "Firmware update failed with reason: Update Failed Error: 41"
i am happy to see that finally your issue is solved.
↧
Innovation Engine Installation
Hi Friends,
installation Instructions for Installing IE in G10 are written:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.
However in ILO-5 Userguide are written:
These firmware types require that you power off the server before installation. The changes take effect after you power on the server. Power off the server and wait 30 seconds if you will update...
What is right?
Jiri
↧
Re: Innovation Engine Installation
Different file formats, different instructions.
There is (maybe was) a *.bin format for install via ILO in powered off status.
Nowadays there is probably only the *.rpm format for use with SPP or in Linux directly - off course while running.
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_13c53b2245aa41cd85f32655aa#tab2
↧
Re: GPU Upgrade DL380p Gen8
Thanks for the reply. The Riser Card which is currently mounted on the server and on which the GridK2 is installed contains these serial numbers: Cage:
P/N 728536-001 CT:LDPGP0AJ36S02V
RISER:
SP#755741-001 DG#728537 AS#728537-001 REV:0A PDPGQ0ALM6Y05B
and on the label there is also written ASSY , HP DL380P G8 GPU Rsr
I do not understand
↧
↧
Re: Innovation Engine Installation
Hallo Torsten,
thank you for the quick answer
Jiri
↧
Re: Sps firmware update dl380 G10
I can't open case cause of banned country
↧
Re: Read Errors Hard 0x000002f6
Hi!
↧
Re: DL360 G9 Memory Operating Frequency
well, I guess I still have the issue.
The bad system board has been replaced but the maximum operating frequency is still capped on 2133Mhz, what can cause this?
↧
↧
Re: ILO - How to enable log/logs?
Hello,
I would suggest you reset ILO5 once, follow the below link.
HPE Integrated Lights Out (iLO 5) for Gen10 Servers - Managing iLO Reboots, Factory Reset, and NMI
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026113en_us
If you feel this was helpful please click the KUDOS! thumb below!
Regards,
↧
Re: DL380 G10 (Xeon 4208) enable max turbo frequency ( W2019 std VMs on ESXi 6.7 free version)
Hello,
Intel Turbo Boost Technology is enabled by default on supported processors. You can disable or enable the technology with a switch in the BIOS. No other user-controllable settings to change the Intel Turbo Boost Technology operation are available. Once enabled, Intel Turbo Boost Technology works automatically under operating system control.
Enabling or disabling Intel Turbo Boost Technology
- From the System Utilities screen, select and press Enter.
- Select a setting and press Enter.
- Enabled—Enables the logical processor cores on processors supporting hyperthreading technology.
- Disabled —Reduces power usage and also reduces the system’s maximum achievable performance under some workloads.
- Press F10.
If you feel this was helpful please click the KUDOS! thumb below!
Regards,
↧
hpe proliant server 2016 installation
hpe proliant ml350 showing error 0x80070026 wile installing server 2016
↧
Re: hp proliant dl385 gen10 plus ram not running at 3200
it sounds like my problem, I want to go for 2400Mhz but I'm capped to 2133Mhz.
↧
↧
Installation ILO firmware *.rpm files in Debian
Hi guys,
according ILO Userguide I can apply for firmware_file_name.RPM files:
#rpm2cpio <firmware_file_name>.rpm | cpio -id
and subsequently I run hpsetup by typing ‘./hpsetup’ at the command prompt.
Is this method correct for debian?
Thanks
Jiri
↧
Re: Read Errors Hard 0x000002f6
Hi
Did that worked?
If you feel given solution/workaround is useful then please accept the solution to close this thread.
If you feel this was helpful please click the KUDOS! thumb below!
Regards,
Sudhir
↧
Re: Installation ILO firmware *.rpm files in Debian
Hi
I have not tried in Debian but it worked for me in readhat and centos so
it should work in debian as well.
Install "rpm2cpio" package if not avaialble in Debian.
If you feel this was helpful please click the KUDOS! thumb below!
Regards,
Sudhir
↧